International Association of HydroSeeding Professionals.
  The best sources of information about the Hydro Seeding Industry.

Update your forum bookmarks to reflect the current forum URL:

***Here is the URL for the International Association of HydroSeeding Professionals main website:

Welcome to the IAHP Forum!

We invite you to use the forum if you have any interest in hydroseeding. This forum is sponsored by the International Association of HydorSeeding Professionals but a membership in the association is not required to use the forum. You do need to complete the simple registration process.

HYDROSEEEDING CONTRACTORS. If you are a hydroseeding contractor or have an intrest in getting into the hydroseeding field our members are friendy, helpful and experience and will help with any problems you have. We invite you to share your knowledge and help those who have questions that you can answer. We invite you to join the IAHP and as many have found this may be the best thing you can do to help your business but you are welcome to particiapte in our forum even without being an IAHP.

Members tell us it is the best $ 100.00 they have spent. One of the key benefits is the free premium listing on, the site is designed to help people find a qualified, expert hydroseeding contractor and can send you enough extra business to pay for your membership many times over. Other benefits include online courses leading to certification as a "Certified Hydroseeding Professional" as well as discounts from suppliers, regional events and other benefits./p>

We want to provide a media for you to promote your products. You are welcome to post about your products and your press releases in our "News from the Manufacture's" section. We also invite you to join the IAHP. Your membership will provide advertising opportunities that will make your membership a valuable investment in your business. Your logo and a link to your website will appear on our member page. You will recieve free advertising in our electronic newseltter. Members prefer to buy from suppliers that support their orgainzation.

If you have questions about if hydroseeding is right for you or if you need help finding a qualified hydroseeding professional the forum can be a great benefit to you. You are welcome to post about questions you may have or to post that you have a job available. We will help any way we can.

You are welcome to post information about your products or equipment. Membership is not required but a membership will get you a listing in our "Dealers" section that can help drive customers looking for new suppliers to your business. Membership in the IAHP is a great investment but you are welcome to participate in the forum without being a member of the IAHP.

Today at 09:22:28 AM by primelawn | Views: 5 | Comments: 0

Turbo turf 500 gallon. Honda engine. Great for smaller size jobs.
Great results.

Can text pictures.

Located in central Ohio.

3500.00 obo

Yesterday at 05:07:35 PM by cls | Views: 12 | Comments: 0

I have an opportunity to do a small green armour system (flexterra and enkamat) installation project in a small storm-water management spillway. Its only about 2500 sqft and as I have not done a green armour installation project I figured this would be a nice small low risk job to get my feet wet. It collects the water from the edge of a small parking lot. erosion control is major part of what I want to do with my business in the future so it certainly something I do not want to pass up. I am fa...
Sat May 19, 2018, 10:40:36 AM by slc tm35 | Views: 37 | Comments: 1

Purchased brand new in 2009, machine gets used about once a week in the  growing season. Hand cleaned after every job then parked under my shed. Just ran 10 tanks through it yesterday, she runs really well no problems at all. It starts up fine and runs fine, the only thing wrong with the machine is there’s no pull cord and the pump casing cracked due to last winter. We had a welder weld it all back up and there’s no leaks. I installed a new seal kit and new turbine a...
Fri May 18, 2018, 10:29:41 PM by primelawn | Views: 24 | Comments: 0

Alright, I've been on for a while but just now need some answers. We are beginning to restore a 1994 finn t120gn that I picked up super cheap. All it needed was a new battery and fuel. Kubota diesel.

I've removed the top plate and sugar, scraped what was loose epoxy off and found most of the holes and thin spots. Now I would like a little more info on doing electrolysis in the tank vs calling a sandblaster. I'm going to take it to a fab shop once it's cleaned up. ...
Wed May 16, 2018, 04:46:15 PM by Teddy Smothermon | Views: 106 | Comments: 7

What do most of you folks use as a standard for mixing seed per 1000 square feet?  I have tried up to 4 lbs per thousand and I don't get a good germination rate.  Can anyone help?
Also, I have a Kincaid 700 and wonder if I can go to a larger engine without any modifications and how do you know your pump is getting "weak"?  Thanks
Pages: [1]

* Recent Topics

No posts were found.

* More Info Links

* Recent Posts

Turbo Turf 500 gallon by primelawn
[Today at 09:22:28 AM]

Profile Green Armour Pricing by cls
[Yesterday at 05:07:35 PM]

Re: For sale: 2009 Easy lawn TM35 by slc tm35
[Sat May 19, 2018, 10:45:14 AM]

For sale: 2009 Easy lawn TM35 by slc tm35
[Sat May 19, 2018, 10:40:36 AM]

Cleaning inside of tank. Rust by primelawn
[Fri May 18, 2018, 10:29:41 PM]

* Calendar

May 2018
Sun Mon Tue Wed Thu Fri Sat
1 2 3 4 5
6 7 8 9 10 11 12
13 14 15 16 17 18 19
20 [21] 22 23 24 25 26
27 28 29 30 31

* Who's Online

  • Dot Guests: 64
  • Dot Spiders: 6
  • Dot Hidden: 0
  • Dot Users: 1
  • Dot Users Online:
  • Dot Online Today: 10