Notice: Trying to access array offset on value of type null in /home/customer/www/hydroseeding.org/public_html/jcms/forum/Sources/Load.php on line 168

Deprecated: Function create_function() is deprecated in /home/customer/www/hydroseeding.org/public_html/jcms/forum/Sources/Load.php on line 178
TM 60 Impeller removal

collapse

Author Topic: TM 60 Impeller removal  (Read 5458 times)

0 Members and 1 Guest are viewing this topic.

Offline chiller61

  • New Member
  • *
  • Posts: 2
TM 60 Impeller removal
« on: Mon February 15, 2010, 03:37:07 PM »
Brand new to forum but have been seeding in New Zealand last 6 years.

My TM 60 has developed a leak from the pump shaft seal. I have taken the pump to bits but have reached a dead end when trying to remove the impeller. Has anyone removed one and if so how.

Thanks


Online Turboguy

  • Administrator
  • Forum Legend
  • *****
  • Location: Beaver Falls, PA
  • Posts: 5958
  • Beaver Falls, PA
    • Turbo Turf HydroSeeding Systems
Re: TM 60 Impeller removal
« Reply #1 on: Tue February 16, 2010, 12:32:26 AM »
I have never taken an Easy Lawn pump apart but pumps pretty much are one of two ways.   The either use a keyed shaft and there is a retaining bolt on the end that holds it on.   If yours was that way I dont think you would be asking.

The other way they do it is to use a threaded shaft and the impeller is basically screwed on.  It sound like what you have.   On our units with the treaded shaft how I tell people to get them off is to take a hammer and a short piece of 2 x 4 or any piece of wood.   To unscrew the impeller you want to turn it counter clockwise if you are looking at it from the impeller side.   Just take the piece of wood and put it on one of the sharp impeller blades and tap it and it should loosen it up to where you can screw it off by hand.

We do have a number of guys who should know all about that pump and hopefully they will jump in soon.
Turbo Turf HS-400-XPW

Offline SimplyGreen

  • Forum Legend
  • *****
  • Location: New Hampshire
  • Posts: 922
    • http://www.simplygreenhydroseed.com
Re: TM 60 Impeller removal
« Reply #2 on: Tue February 16, 2010, 07:47:40 AM »
If its the same as my L90. which i think it is, then it screaws off counter clock wise... now if its been on there for a while, it might be challenging at first. but it doesn come off...

Simply Green Hydroseed
New Hampshire and Southern Maine and Mass
Account manager and Applicator of DirtGlue
Easy Lawn L90(900gal)
Easy lawn C125 Mounted to International 4700
WWW.SIMPLYGREENHYDROSEED.COM

Offline chiller61

  • New Member
  • *
  • Posts: 2
Re: TM 60 Impeller removal
« Reply #3 on: Wed March 03, 2010, 11:10:12 PM »
A belated thanks a good smack or two and off she came.

 

* Recent Posts

Re: should I upgrade my turfmaker? by hunthydroseedinggroup
[Wed January 12, 2022, 03:45:09 AM]


Re: should I upgrade my turfmaker? by Turboguy
[Sat January 08, 2022, 06:18:19 PM]


Re: Want my new lawn to succeed, looking for any suggestions! Thanks by Frank223
[Sat January 08, 2022, 08:50:05 AM]


should I upgrade my turfmaker? by arhymer101
[Fri January 07, 2022, 11:55:01 AM]


Re: Having Trouble Getting Supplies by Turboguy
[Fri January 07, 2022, 07:11:47 AM]

* Calendar

January 2022
Sun Mon Tue Wed Thu Fri Sat
1
2 3 4 5 6 7 8
9 10 11 12 13 14 15
16 17 18 [19] 20 21 22
23 24 25 26 27 28 29
30 31