Hydroseeding Forums

Main Category => Finn Questions => Topic started by: ajmctree on Sat May 16, 2020, 01:16:13 AM

Title: Finn T170
Post by: ajmctree on Sat May 16, 2020, 01:16:13 AM
We were spraying last weekend when we had the rubber bushing between the PTO out put shaft and the pump intake shaft come completely apart. We had pieces of rubber everywhere.

We managed to get Two of these bushings and was wondering do you have to move the pump from the frame or can you just loosen the collars to get this in. Have not had this happen before so its a new fix.

Its an older t170.
Title: Re: Finn T170
Post by: ajmctree on Mon May 18, 2020, 09:49:49 PM
We got it, took the pump off and re[placed the rubber bushing.
Title: Re: Finn T170
Post by: Turboguy on Tue May 19, 2020, 09:09:49 AM
Glad to hear you got it resolved.