collapse

Author Topic: 1995 Finn Auger Seals  (Read 451 times)

0 Members and 1 Guest are viewing this topic.

Offline Dareal39

  • Forum Member
  • **
  • Location: Northern Colorado
  • Posts: 19
1995 Finn Auger Seals
« on: Mon December 30, 2019, 06:22:59 PM »
Does anyone know where to buy these? Finn dealer said they only have 2? seals and the shaft size on my machine is 1.5?

Offline HSandG

  • Forum Member
  • **
  • Location: Weare ,New Hampshire
  • Posts: 38
    • www.hsandgerosioncontrol.com
Re: 1995 Finn Auger Seals
« Reply #1 on: Tue December 31, 2019, 03:55:34 PM »
Finn switched to 2" shafts around 1999 , so the 1.5 size is tough to get. The seal is nothing more than a rubber belt material. Best thing to do is get a piece of quarter or three eights scrap  belting from a local crushing plant and cut a 1,25" hole in it with a hole saw.It will fit nice and tight on the shaft. I have done this and it works good. Use the old seal as a template for the bolt holes and the center hole.
finn t-330 , b-260 mulcher

Offline Dareal39

  • Forum Member
  • **
  • Location: Northern Colorado
  • Posts: 19
Re: 1995 Finn Auger Seals
« Reply #2 on: Tue December 31, 2019, 04:56:31 PM »
Awesome thank you I?ll try that

Offline Finn Guy

  • Officers
  • Forum Member
  • **
  • Posts: 38
Re: 1995 Finn Auger Seals
« Reply #3 on: Thu January 16, 2020, 07:15:26 AM »
Finn carries 1.5" and 2" shafts, so the dealer should be able to get you the parts you need.  Ask your dealer parts rep to confirm with Finn parts.  I'm going to speculate it's due to the age of your machine that something specific is no longer supported, but it sounds like you should be able to still get something that is appropriate.
Ron Ciolfi
Finn Corporation
410-299-8846

 

* Recent Posts

Re: Anyone having problems with the new profile premium wood mulch by Turboguy
[Thu August 06, 2020, 09:38:53 PM]


Re: Anyone having problems with the new profile premium wood mulch by janniboy@roadrunner.com
[Thu August 06, 2020, 08:33:05 PM]


Re: Nozzle selection? by Turboguy
[Tue August 04, 2020, 09:10:47 PM]


Re: Nozzle selection? by EvergreenD
[Tue August 04, 2020, 12:56:54 PM]


Re: Nozzle selection? by EvergreenD
[Mon August 03, 2020, 09:38:19 PM]

* Calendar

August 2020
Sun Mon Tue Wed Thu Fri Sat
1
2 3 4 5 6 7 8
9 10 [11] 12 13 14 15
16 17 18 19 20 21 22
23 24 25 26 27 28 29
30 31