Notice: Trying to access array offset on value of type null in /home/customer/www/hydroseeding.org/public_html/jcms/forum/Sources/Load.php on line 168

Deprecated: Function create_function() is deprecated in /home/customer/www/hydroseeding.org/public_html/jcms/forum/Sources/Load.php on line 178
New Finn T-60 Questions

collapse

Author Topic: New Finn T-60 Questions  (Read 449 times)

0 Members and 1 Guest are viewing this topic.

Offline Hsean7

  • New Member
  • *
  • Location: Ohio
  • Posts: 1
New Finn T-60 Questions
« on: Sat March 27, 2021, 01:13:12 AM »
Hey everyone,

I?m new to the forum and just purchased a used Finn T-60. I?m in Ohio and am located roughly 45 minutes away from a Finn dealer. I purchased it in Maryland and got it back home. It?s a skid model.
I have a few questions regarding if anyone had a manual for it so I could make sure I knew all service, grease fittings, ect.

Also, any recommendations to start with? We have started the machine and ran the agitator, ect. We also sprayed water out of it and it seemed very strong. But before I used it on a job site the first time is there anything you would recommend I do prior?

Offline Turboguy

  • Administrator
  • Forum Legend
  • *****
  • Location: Beaver Falls, PA
  • Posts: 5954
  • Beaver Falls, PA
    • Turbo Turf HydroSeeding Systems
Re: New Finn T-60 Questions
« Reply #1 on: Wed March 31, 2021, 12:30:37 PM »
It sounds like the T-60 is in good shape and ready to go.  One of our frequent posters is a Finn Rep and another who has worked of a Finn Dealer in New England.  One of them may see this and be more helpful than I can be.   It doesn't sound like you have any issues with the unit.  My thought without knowing much about those is there is an automatic greaser for the pump clutch (I think) that you might want to check.  Otherwise if everything is running well like it sounds you should be good to go.
Turbo Turf HS-400-XPW

Offline hydroservice

  • Forum Legend
  • *****
  • Posts: 1858
Re: New Finn T-60 Questions
« Reply #2 on: Fri April 30, 2021, 09:50:28 AM »
If i knew the serial # of the machine I could e mail you a manual. It sounds like you have tried the basics and it all works so it should be ready to use
Erosion Control Equipment & Products Since 1947
                     Pittsfield, Maine
                        FINN T-330

 

* Recent Posts

WTB 1000 gal seeder by Rockdamage
[Thu November 25, 2021, 09:32:00 AM]


Re: Hydromulching a sand quarry by HP Hydromulching
[Fri November 19, 2021, 05:51:44 PM]


Re: Hydromulching a sand quarry by hydroservice
[Wed November 10, 2021, 09:30:26 AM]


Re: Hydromulching a sand quarry by HP Hydromulching
[Mon November 08, 2021, 02:48:56 PM]


Re: Hydromulching a sand quarry by Turboguy
[Mon November 08, 2021, 12:09:10 PM]

* Calendar

December 2021
Sun Mon Tue Wed Thu Fri Sat
[1] 2 3 4
5 6 7 8 9 10 11
12 13 14 15 16 17 18
19 20 21 22 23 24 25
26 27 28 29 30 31